Open Source Training Seminar FreePBX Paid Support

Ticket #286 (assigned Feature Requests: None)

Opened 3 years ago

Last modified 2 years ago

Outbound route based on caller ID and Extension

Reported by: emidiez Assigned to: nobody (accepted)
Priority: minor Milestone: 4.0
Component: Core Version: None
Keywords: Cc:
Confirmation: SVN Revision (if applicable):
Backend Engine: All Backend Engine Version:

Description (Last modified by wozto1s) 

Enable the use of Called ID and SIP extension to define 
witch route the outbound call will make.

The proactical use of this is having a family group using 
only one A@H, and each sub group (parents, sister, 
etc) have their own pre-paid account with a provider, so 
they controll and pay their own expenses.

The caller ID use of for the same reason. 

If you have a single PSTN line coming into this A@H, 
then you configure DAD's cell to go to A route -> X 
provicer account. Sister's phone to go to B route -> Y 
provider account, etc.

Change History

04/06/06 10:08:51 changed by stevenberkholz

This would also help with faxing.

I have my fax machines in a legacy PBX. If a fax is made, I do not want it to use any VOIP providers. If a voice call is made, use my standard dialplan.

I can't use contexts in this case to control the dialplan, because both type of calls are coming in the same PRI.

The legacy PBX does provice callerid, which I could use to determine if it is a fax machine extension on the legacy PBX.

04/24/06 02:40:49 changed by anonymous

I would second this request. I have a small home office and I want calls from my office line to go out on my business line, and calls from the rest of the house to go out on my personal line

HOWEVER, it's extremely useful to be able to dial a prefix from the home extension to still dial out on the business line

At the moment I am not using AMP/Freepbx, and I modify extensions.conf to attach a prefix to the incoming call so that the caller id shows whether the call came in on the business line or personal line (and this is also used for distinctive ring detection. Then on the outbound I default to a particular trunk depending on callerid, but it can be overridden by prefix digits. Works very well, but not sure how to port this to freepbx?

05/28/06 06:34:38 changed by wozto1s

  • description changed.
  • milestone set to 2.2.

10/16/06 04:12:29 changed by RobThomas

  • milestone changed from 2.2 to 2.3.

Link with #152

01/06/07 20:48:53 changed by wiseoldowl

Another one that could probably be satisfied by naftali5's Custom Contexts module (see #1447).

01/08/07 11:46:49 changed by

  • milestone deleted.

Milestone 2.3 deleted

01/08/07 12:07:37 changed by vgster

  • milestone set to 2.3.
Donate



Support
Download
Develop
Forums
News
Documentation
Paid Support
About

Paid Ads